Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Blog Article

Don't underestimate the forklift at the workplace. If the operation is not good, there will certainly be significant crashes in minutes, and there are several crashes involving forklifts.

Case 1: The forklift cargo blocked the chauffeur's view, and the individual in front could not be found, resulting in a rolling crash.
Instance 2: In order to maintain the balance of the forklift when raising heavy products, the staff members used their body weight as the weight, which practically triggered casualties.
Situation 3: The width of the forklift freight surpasses the permitted size of the course and holds on the roadside shelf, which almost causes an accident.
Instance 4: Forklift is speeding and rolls over during a turn.
Instance 5: The forklift vehicle driver did not notice the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift motorist does not use the safety belt, the forklift lifter falls and the chauffeur is crushed when the forklift surrender.
Instance 7: The forklift vehicle driver did not put on a safety belt and fell from the lorry when it surrendered and was squashed.
Forklift operation must focus on these matters ：.

Start.
1. Prior to starting, observe the environments, and after verifying that there are no challenges that hinder the safety of driving, honk the horn first and afterwards start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge need to be safe before starting.
3. When the forklift begins with a lots, the motorist needs to first verify that the lots is secure and trusted.
4. The start needs to be slow and constant.

Driving.
1. When driving, the height between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the pole should be tilted backwards. .
2. Do not lift the fork expensive when driving. When entering and leaving the task site or while driving, beware that there will be no challenges in the sky. When the tons is traveling, the fork must not be raised too high, which will affect the stability of the forklift. .
3. After discharging, the fork must be reduced to the normal driving placement before driving. .
4. When turning, if there are pedestrians or vehicles nearby, the driving signal ought to be released first. High-speed doglegs are prohibited. High-speed doglegs will create the lorry to shed lateral security and topple. .
5. When the forklift is downhill, it is strictly restricted to shut off the flame and slide, and it is restricted to brake suddenly while driving with tons unless there are special situations.
6. When the forklift is running, it should obey the web traffic rules in the factory and must maintain a particular safety distance from the lorry in front. .
7. When the forklift is running, the tons has to remain in the lowest position that does not hinder the driving, and the gantry must be effectively tilted back. The load shall not be increased except when stacking or filling. .
8. The height of the tons have to not block the chauffeur's view. In unique situations, when the product influences the forward vision, drive at a low speed when reversing.
9. It is restricted to turn on the ramp, nor to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory location is 5 km/h, and it must drive safely at a low speed when going into the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is forbidden for employees to depend on the fork to hold products and play a balancing duty. .
12. If issues are discovered, they will be fixed and reported in a prompt way, and they will certainly never operate with diseases or conceal them.

filling and unloading.
1. When fork-loading items, the range in between both forks must be changed as needed to make Stand-on Electric Pallet Stacker the lots of both forks well balanced and not skewed, and one side of the thing need to protest the rack. .
2. It is forbidden to work with a solitary fork or use a fork top or draw. In special circumstances, safety and security warning signs have to be set Stand-on Electric Pallet Stacker up to advise surrounding pedestrians. .
3. In the process of filling and discharging items, the forklift needs to be stopped with the brake. .
4. The speed of the car should be slow and steady. Beware not to roll the wheels on the dunnage, so as not to extend the rolled items and injure individuals. .
5. When using a fork to fork the goods, the fork must be as deep as feasible under the load, and it must be kept in mind that the fork suggestion need to not touch other products or things. The load must be maintained with marginal back tilt of the gantry so that the load does not move in reverse. The pole can be slanted onward slightly when the tons is reduced to enable easy positioning of the lots and removal of the forks. .
6. It is forbidden to fork goods at high speed and hit tough items with the fork head. .
7. When the forklift is working, it is restricted for individuals to stand around the fork, so regarding stay clear of the collapse of the goods and injure people. .
8. Overloading is prohibited, and it is prohibited to use forks to raise employees to take part in high-altitude operations to prevent high-altitude falling crashes. .
9. It is not enabled to utilize the brake inertia to slip, put, round or roll things. .
10. It is not enabled to utilize forks to pick, transform pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you have to discharge the goods or lower the fork structure.
2. Draw the parking brake deal with to dead or dispirit the emergency brake button.
3. The engine is switched off and the power is cut off. (Except for special situations, such as the driver does not leave the car's view and does not go beyond 1 minute).
4. Get rid of the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance needs to be checked, and fuel, lubing oil and air conditioning water ought to be added.
2. Examine the safety performance of beginning, running and braking.
3. Examine whether the lights and horn signals are full and effective.
4. During the operation of the forklift, examine whether the stress and temperature level are typical.
5. After the forklift is running, the external leakage ought to likewise be checked and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You need to inspect before leaving the cars and truck;.
2. When you experience someone before you throughout driving, you need to send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be as well sharp to prevent the propensity of "free turning";.
6. Running up and down the slope must be sluggish and consistent, and no switching on the slope is permitted.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift employees lug the goods and move on, if they encounter large or hefty items and go to the driver's line of sight, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be adhered to in the procedure.
1. Solitary fork procedure is not permitted.
2. It is not allowed to lift the goods for long distance driving.
3. It is not allowed to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to use inertia force to get the goods.
6. It is not enabled to utilize stopping pressure to expatriation round or easy-to-roll items.
7. It is not allowed to bring people to service the pallet or fork, and it is purely restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Vehicle parking is not permitted under the following problems.
1. Curves, slim roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the section with the same length as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844